GN706020 700 600 200 IP66 metal electrical enclosure ide argenta

Electrical Enclosure Solutions by Peekn Services for professionals

	GN706020 - 600W 700H 200D

GN Electrical Enclosure Overview


Representative image	The GN Series of electrical enclosures / cabinets are general purpose in nature and primarily used for the housing and protection of electrical / electronic control, intrumentation, motor control, HVAC, pneumatic, hydraulic, monitoring & distribution components. They are fit for use inside or outside* in Commercial, Domestic, Industrial, Residential & Retail environments (examples).

GN706020 - CONTENTS @ A GLANCE

	ITEM DETAILS @ A GLANCE
	FEATURES @ A GLANCE
	ACCESSORIES @ A GLANCE
	DIMENSIONED DWG @ A GLANCE
	COMPONENTS @ A GLANCE
	COOL SOLUTIONS @ A GLANCE
	CONTACT US

GN706020 - ITEM DETAILS @ A GLANCE

Description:	600W x 700H x 200D mm, IP66 Mild Steel Enclosure, RAL 7035 Grey, C/w mounting plate & cable entry (s)

Width (mm):	600
Height (mm):	700
Depth (mm):	200
Colour:	RAL 7035 Grey
Weight (kg):	23.5
Doors:	1
Locks:	2
Cable entry:	1
Resistance to
impact:	Mechanical; IK10
Degree of
protection:	Environmental; IP66 - NEMA 1, 4, 12
Load capacity:	Total load = 275 kg, Door: 25 kg, M/Plate: 250 kg.

Finish:	Ripple, hardened polyester powder coat, 80 ~ 120 μ, ripple pattern, UV tolerant, RAL 7035 grey.
Material:	Enclosure > Cold - rolled steel (EN 10130+A1), 1.2mm to 600H x 600W, 1.5mm above
	Enclosure Door > 1.2mm to 500mm H, 1.5mm 600 ~ 800mm H, 2.0mm above.
	Gland plate > Qty = 1, Cable entry = 500W x 140D
	Mounting Plate > Galvanised sheet steel, 2mm, 800 mm & above have strengthening returns on either side.
Protection:	Environmental; IP66 - NEMA 1, 4, 12
	* Corrosion resistance according to the UNE-EN 62208 standard.
	For outdoor installations the use of a canopy is recommended.
	The effect of corrosion must be taken into consideration
	Mechanical; IK10
Approvals
/Certs*:
	* According to low tension directive 2014/35/EU.
	Norms: UNE-EN 62208 and UNE-EN 61439-1 (in the affected part).

	Certificate UL508A.
	Bureau Veritas under norms UNE-EN 62208:2003 and UNE-EN 60529 (only for single door cabinets).

Feeling the Heat? (or not enough)?. Our enclosure solutions include industrial climate control components such as Ventillation Louvres, Fan filter untits, Filter Units Fan & Filter units, Anti-condensation Heaters, Heat Exchangers, Air Conditioners, Thermostats, Hygrostats, Fan speed controllers, Enclosure Climate Monitorig & Control (web).

	COOL CALCS
	Is the HEAT ON with your Project?
	We offer an obligation free climate control calculation service, have a look at the following linked PDF to see what we need to help you.
	Enclosure_Solutions_Cool_Calcs.PDF

    Thank you for visting our site, Your interest in our products is appreciated and we look forward to meeting (if not exceeding) your product / service expectations.

    Your feedback, comments, questions, suggestions are always appreciated, please feel free to request pricing & availability or let us know if we are missing some information that you.

    We look forward to hearing from you soon.

The gn202015 is similar in size and application to a MSB202015G

+++++++++++

You R Here

GN Enclosure Sizes (PDF)

All Mild Steel enclosure sizes (PDF)

----------------

+++++++++++

SEE ALSO

+++++++++++

+Download+ PSEB + GN + PRCE + PSCM PDF

Other Enclosure Types

Peekn Services, ABN: 15 924 167 896, Heathcote, N.S.W. 2233

Mobile Service: 0448 085 061

	1.5mm Body and Door fully welded with folded front profile.
	Wall mounting holes provision for in the rear body section
	Enclosure supplied with gland plate (s).
	RAL 7035 UV Hardened Light Grey as standard, select models available in RAL 2008 Orange.
	Enclosure supplied with gland plate (s). (shown @ top in image).
	Sealed hinge / accessory fixing points either side for swapping the door hingeing.
	Double bit lock insert as standard, can be replaced (see accessories).
	Single point locking 400H & below, 2 point locking 500 ~ 800, 3 Point locking for 1000H + & double door enclosures. (see also"K" below).
	2mm Internal mounting plate / gear tray.
	Fully foamed in PU Gasket that provides IP66 Protection.
	The door opening angle is 110⁰ as standard, they are fully reversible and mounted with concealed hinges, A door earthing stud is available.
	Pre-drilled support rails on door which additionally allow the fixing of door cross rails which can be used for component / wiring looms / cable management.

	GNWB - Wall mounting brackets
	Used to wall mount the enclosure with an 11mm seperation
	Maximum vertical (or horizontal) load capacity of 490 kg
	Material: Galvanised steel
	1 Unit = pack, 4 adjustable supports
	Part # GNWB - 48423 (dims)

	GNPMK - Pole mounting kit
	Suits enclosures 300 ~ 800mm Wide
	Effective diameter; 60 ~ 200mm, max load = 130 kg
	Material: Galvanised steel
	1 Unit = pack, 2 brackets + fixing accessories.
	Part # - PMK 48420

Representative image only	GNPL - 100mm Plinth / Base

	A Plinth is not available for this enclosure size


	Part # N/A (Please click here for a list of plinth sizes & compatible enclosure models)

	Lock options for GN Enclosures
	Keyed cylinder to replace existing double bit lock insert
	Suits single door enclosures, not suitable for use on enclosures with 3 Point locking.
	Supply includes cylinder keyed 333, 1 key
	Part # GNKLA333

GN Electrical Enclosure Overview

GN706020 - CONTENTS @ A GLANCE

ITEM FEATURES @ A GLANCE

GN DIMENSIONS @ A GLANCE

Click on a link below for the BIG PICTURE or CAD File

DIMENSIONS>

	Keyed Wing Handle to replace existing double bit lock insert.
	Suits all GN Series enclosures
	Supply includes cylinder keyed 333, 1 key

	Part # GNKLW333

	T Handles / Padlockable Handle
	Suitable for use with all enclosures.
	THNL - T Handle, Non locking, chome plated.
	THKA - T Handle, keyed alike, 2 keys, chome plated.
	TH92268 - T Handle, keyed 92268, 2 keys, chome plated.
	THCL001 - T Handle, keyed CL001, 2 keys, chome plated.
	LH-PAD - L Handle with padlock facility.

	GNLEB - Lifting eye bolts
	Fitted with M12 nuts.
	Cannot be used in conjuction with a rain canopy
	Material: Galvanised steel
	1 Unit = pack, 2 bolts + brackets / cast
	Part # GNLEB - LEB 48475

Representative image only	GNRC - Rain canopies
	Used to minimize the effects of rain and air-born contaminants (detrtitus) on the PU seal at the top of the cabinet. The top of the enclosure is protected front, back and both sides.
	This is "manufacturer recommended" for outdoor applications.
	Material: RAL 7035 painted
	Part # GNRC6020

Representative image only	GNID - Inner door / hinged escutcheon

	Sorry, Not available for this model / size

	Please click here for applicable sizes / models

Representative image only	GNDI - DIN Frame / Chassis & Escutcheon
	Reversible hinges and 90⁰ opening.
	Min clearance = 58mm, max = (D-52 mm) to front door.
	Material: RAL 7035 painted
	*Requires DAB... to suit enclosure depth for mounting.
	Not Available for this enclosure size > (GNDI Sizes)

	DAB - Mounting plate adjustment brackets
	Can be used to adjust the height of the mounting plate in increments of 12.5mm
	Required for the installation of inner doors.
	Material: Galvanised steel
	1 Unit = pack, 4 adjustable supports
	Part # DAB200

The GN Series of enclosures are complemented by a wide range of components that are available for you to include in your project. Please see below a very brief overview of typical electrical components used within our enclosure ranges. Please Note: This list is not extensive, please contact us with your enquiries for other items that we may also be able to supply.


	DIN Rail
	Terminal Blocks
	Ducting
	MCB's
	RCD's
	RCBO's
	Main Switches
	Isolators
	Relays
	Contactors
	Surge Protection
	Emergency Lighting
	kWh Meters
	Analogue Meters
Push Buttons, Selector Switches, Indicator Lights, Emergency Stop stations, Labels, Earth Bars, Neutral Links, IP66 Switchgear etc. etc.